Looking to know how to charge JBL Xtreme 2 through its protected DC input power port and the included 19-volt power adapter. Follow these tips, and you’ll likely never see that the speaker won’t charge. If all components are working properly, charging almost always works well.
- Charge Jbl Xtreme 2- Simple Way
- Open The Speaker Charging Port Cover
- Plug The Dc Power Cord Into The Speaker To Continue With Jbl Xtreme 2 Charging
- Let The Jbl Xtreme 2 Charging Run Until All Battery Power Lights Go Off
- Next, Snap Closed The Port Door
- Done With Jbl Xtreme 2 Charging!
- Frequently Asked Questions (Faq) – How To Charge Jbl Xtreme 2
Charge Jbl Xtreme 2- Simple Way
First of all, we suggest that you charge the speaker with the included charging dock. What is it about this that makes it so? We won’t discuss those options here, in a bind, full charging of the JBL Xtreme 2 can be done with other vendors’ wall chargers.
When the battery status gauge shows a single flashing red light. This time to charge this speaker. You can see the location of the speaker’s battery indicator gauge in the next picture.
Plug the black barrel DC output charge cord jack into the speaker when the gauge shows a single blinking indicator. The wall outlet needs to be plugged in for the charger to work.
Don’t worry though about having to wait for complete charging of the speaker before you can play it again. The JBL Xtreme 2 will indeed play while charging, although it might take slightly longer to charge when played at high volumes.
Finally, after a few hours, the speaker charges. You have to play it for fifteen hours before you need to charge it again.
Here are tips on how to charge this portable Bluetooth speaker with its protected DC input power port and the included 19-volt power adapter. Follow these tips, and you’ll likely never see that the speaker won’t charge. If all components are working properly, charging almost always works well.
For Best Results, Use The Included Power Adapter. As mentioned above, use the JBL wall charger that comes with this speaker, as shown next.
Open The Speaker Charging Port Cover
Attach a coin or straight screwdriver to the slot at the top of the port door and open it. As shown next, this exposes the charging port and power out.
Plug The Dc Power Cord Into The Speaker To Continue With Jbl Xtreme 2 Charging
Then, plug the barrel connector end of the wall adapter’s cord into the matching DC input port on the speaker, as shown next. You can charge your speaker at home using the wall outlet, but if you’re going to use a portable charger, it’s best to use a power strip.
When it comes to choosing a power strip, you should look for a model that has at least three outlets. This will allow you to plug in your phone, tablet, and any other devices you want to charge while still having access to the wall outlet.
Plug The Ac Power Adapter Into A Working Power Outlet as shown next, plug the charger into a functioning AC outlet once the Xtreme 2 and its AC adapter are connected. When everything is working correctly, at least one of the battery status lamps illuminates the speaker.
Five lamps on this speaker light up at the same time as the battery charge increases. You can get the Xtreme 2 speaker to charge by using the JBL AC adapter. It is a special type of AC adapter that is designed to work with the Xtreme 2 speaker.
When you are charging the speaker, it will light up with five battery status lamps. This is a good way to monitor the battery status. If the lamps start blinking, then it means that your battery is not charging.
You should check the connection between the JBL AC adapter and the speaker. Make sure that the AC plug is plugged in properly. If it isn’t, then you should replace the plug.
Let The Jbl Xtreme 2 Charging Run Until All Battery Power Lights Go Off
When the last battery status lights light blinks, the charging of the battery is almost complete. The battery charging cycle finishes when all battery status gauge lights go out, as shown next because the last blinks for several minutes more to top off the charge. There is an AC outlet that you can plug the Xtreme 2 into. If the outlet isn’t functioning, the battery won’t charge.
The last battery status light will be blinking when the battery is almost full. This is the last stage of the charging process. You can use the charger to charge the battery for up to eight hours. After this time, the last battery status light will blink for several minutes. This means that the battery is fully charged.
Next, Snap Closed The Port Door
If you don’t close this door, the water could enter the area and damage the electronic components inside. The port door needs to be fully closed to get the fullest water resistance. In the next picture, you can see how this port door looks when fully closed and sealed.
The next thing you need to do is to make sure that the connector is closed tightly. The connector is where you connect the external power source to the portable device.
If you want the best protection from water, you need to make sure that the connector is completely closed. Otherwise, water can enter the connector and damage the electronics inside.
You can use the rubber sealer to protect the connector. This will help to prevent water from entering the connector. When you are done, make sure that you place a towel or paper on top of the device.
You can also use a plastic bag. Place the device in the plastic bag and then put it in a dry area. The plastic bag will prevent any moisture from getting inside the device.
Done With Jbl Xtreme 2 Charging!
If you have been able to fully charge our portable speaker. Just after the speaker is turned on the battery status gauge is displayed. The speaker is fully recharged because all lamps glow.
It is necessary to repeat this process every fifteen hours to keep the battery in good working order. When the battery status gauge lights show only one lamp glowing, it needs to be charged.
Frequently Asked Questions (Faq) – How To Charge Jbl Xtreme 2
Why Does My Jbl Xtreme 2 Keep Shutting Off?
An aging internal battery may cause this, as the battery can no longer deliver enough current to run the speaker properly. Installing a new battery often solves this issue though. To do that, we suggest that you get with a qualified electronics technician.
What’s The Jbl Xtreme 2 Charging Time?
Depending on the state of the battery, full charging of the speaker can take between three and four hours. The speaker comes with a wall accessory that can be used to charge the speaker.
How To Shut Off Jbl Xtreme 2?
When the speaker is ON, the power button glows or flashes either blue or white depending on the mode it’s currently in. Press this button to shut it off. All lights should go out within a couple of seconds. The speaker should also play that JBL trademark falling guitar cord sound.
How To Turn On Jbl Xtreme 2?
No lights glow, and no sound comes from the speaker when it’s OFF. Turn it on by pressing the Power button. See the Power button location shown in the next picture.
What Does The Jbl Xtreme 2 Flashing Red Light Mean?
If you see a red light blinking on the battery level gauge, this means that the speaker will shut off within an hour if not charged again and that the battery has very little charge left. One of the battery gauge lamps blinks white while you charge the speaker from an almost dead state.
How Do I Know If My Jbl Xtreme 2 Is Charging?
The battery indicator on the Xtreme should stop blinking and show five dots when the battery is fully charged. The battery indicator wouldn’t stop blinking if the unit was being used while it was still being charged.
Does The Jbl Xtreme 2 Come With A Charger?
The strap has been included for the JBL Xtreme 2. If you can’t do it again, please try again later. It comes with a carrying strap and a charging cord, yes.
Can I Charge My Jbl Xtreme 2 With USB?
The JBL Xtreme 2 doesn’t have a micro USB port, so it doesn’t have a charging port. You will also be able to charge your devices with USB output. The MicroUSB port is only used for servicing.
How Can I Charge My Jbl Speaker Without A Charger?
If you want to use the speaker by battery, you need to charge the speaker before use. Make sure that the speaker is turned off. The micro-USB cable needs to be connected to the USB AC adaptor.
We’ve been using the JBL charger that came with my JBL speaker for years. We have very high quality and the JBL speaker is charged very quickly. We know that the JBL Xtreme 2 has a USB charging port. Finally, after a few hours, the speaker fully charges.
Then, play it for roughly fifteen hours before you have to charge it again. We hope that this article helped you gain all the information you needed to know how to charge JBL Xtreme 2. Thanks for reading!